This is modified and compiled by me and is what I use on both of my machines, an F350 with 10W laser, and A350 with 1.6W laser. The above is the latest (as of writing this guide) version of snapmaker firmware.
So here is the warning, I’m not liable for any damage to your machine, material, fire, or loss of sanity. This is NOT in the private releases (the ones supplied by Snapmaker directly) so you WILL have to load a ‘custom’ firmware. To start! This does rely on the inline control that’s been incorporated in the public github version of the firmware. It should be the same pretty much, just it can measure your material itself. However, I’ll also be putting notes that SHOULD work (EDIT: spoiler, it does) with the 10W, which I have, I just haven’t tested yet. I’ll be posting the setup I use for my A350 with the original 1.6W laser. As always, feel free to ask questions and I’ll try filling in any gaps you find.
Letting you skip Luban or using the USB drive entirely.Ī quick note, this guide, like most of mine, will assume you have some experience with the machine. This guide will allow you to do your entire project in Lightburn, and (if connected via USB) run it directly from Lightburn. It’s been awhile since I’ve done a guide, and this one was a long time coming.
0 kommentar(er)
